jewelry wholesalers in china Help: How to repair the broken jade bracelet?

buy wholesale 10k gold jewelry 1. After the two are divided into two jade articles, the designers and sculptors always analyze their original shapes according to their damage. Divide the original carvings into two or more independent or connected small pieces. This repair, because it is generally not abandoned, it is reduced or made up for the original losses, and even the value of the jade articles after repairing is sometimes not inferior to the original.
The a few years ago, I saw a collection of agate sculpture "Fulu Shouxing" in a collector's room. , Very eye -catching. Later, when I went to see again, there were "Shouxing Blessings" and "Meihua Deer" on the case, but "Fulu Shou yesterday" disappeared. After careful observation, I knew that the original was accidentally touched by the owner, causing the deer to take off the body, and broke a front leg. The owner was heartbroken at the time. After re -carving, it turned into two independent works: "Shouxing Blessing Shou" by the original Lao Shouxing, Dahongtao and Bats; Naturally, the surroundings of the deer are carved with small grass and miscellaneous stones, and they still feel a complete feeling.
The high green emerald pendant is precious. There are also collectors who have accidentally played the play. As a result, they became a pair of two unique earrings after repair.
2, golden jade inlaid gold flat inlaid in the jewelry industry is a commonly used process, such as embedded treasure rings, diamond rings, embedded treasure necklace pendants, embedded ears, and so on. The golden jade inlaid is easy to remind people of the "Golden Yu Liang Yuan" in the novel "Dream of Red Mansions". It is a signs of auspiciousness. Moreover, Jinyu and Jinshi are very precious, and the colors are also very harmonious. Therefore, the ancient and modern Chinese and foreign golden jade inlaid utensils and decorations are always favored.
Golden jade inlaid is both a traditional process. As a skill, it is used in the repair of jade articles. For example, emerald and white jade bracelets are originally smooth and round. Pack a section of golden hoop. Some damaged jade and emerald jewelry can even achieve perfect and exquisiteness without exposing a trace of defects; its scars and cracks are completely covered by the combination of gorgeous carving gold and the unified and harmonious combination of golden jade. We used to see a dragon and phoenix cigarette holder that was carved with high green emerald carved in the late Ming and early Qing dynasties. It is said that this was a portable player of an old general. Due to the changes and war, the tip of his mouth was lost. The old general was very annoyed and called a few jade craftsmen to discuss how to repair it. At that time, two plans were proposed. One was that after renovation, the cigarette holder became shorter, and the overall image was not proportional. Maintain the size of the original without affecting use. The veteran supports the second solution. As a result, this expensive jade was repaired as a golden head and a golden phoenix mouth. The color tone was harmonious, and the traces of repair were not exposed, and the style of rare treasures was still not lost.
3. Revision This is the premise of covering up and making up for the damage of jade, and the ingenious creation is ingenious.
Im masters have created and accumulated a variety of wonderful remedies and reinforcement methods from the long artistic career, such as "removing high and replenishing", "removing fat and thinning", "replenishment with bad bad" , "Break and break" and so on. In the early 1970s, we saw a clever white jade crab pot, which is a rare masterpiece: the pot is white, the crab shell is orange -red; the pot is thin and translucent, the crab is vivid and realistic, and the carving is very delicate. Unfortunately, there is a small hole in the bottom of the pot, which is obviously caused by accidental stamps, so the value of the overall work suddenly declines. Later in front of the master of art, after careful consideration of the art master, breaking through the routine, turning the white jade basin into a flat basket prepared by the "rattan": the cooked crabs were placed on the craft utensils prepared by the "rattan". It was more rich, reasonable and reasonable, and there was no trace of modification, which was presented in the jade carving industry at that time.
The re -trimming method is also widely used in the carving industry today, but the degree of design sculptors is very high, because it does not have a lawful rule. It can only be applied flexibly according to the specific situation of the work. It is strange to be surprising. Innovation, it is not easy to leave flaws.
4, fracture bonding
The jade wares are broken, and in modern times, it has also been used to repair it. Fix well, and even "chaos is right". Mr. Li Gefu, a collector in Taiwan, once introduced cases in this area. One year, he bought a very good Shang Zhou Yuyu in the Hong Kong market, which was pale yellow. After going home for a while, I appreciated it with a magnifying glass, and found that the corner of the jade was cracking. Mr. Li put the jade in the boiled water. As soon as boiling water was boiled, the jade was revealed. It turned out that this was a damaged jade jade that was bonded with glue. Under the high temperature, the gum was originally supplemented. So the jade articles were heavy and damaged, revealing flaws.
Generally speaking, after the jade is broken, it is considered that the trim that is divided into two is not cost -effective. The general operation process of this adhesive method is to clean the cracks carefully, and then apply it with high -efficiency adhesives (polyache acetate vinyl floating agent or epoxy -based resin), and then carefully quasion the original The part of the area is bonded hard, the bonding agent of the crack is squeezed out, and then wiped with acetone. In the process of solidifying the adhesive, it is best to fix it with a tape or press it with heavy objects to avoid misplace.
5. The lack of adding jade carving pendants accidentally dropped, and there were constant cracking and only lacking a small piece, but after all, it was "broken". So people think of how to "cosmetic surgery" for it, and its method is to supplement. There are two ways to supplement: First, it is filled. A few years ago, a friend gave up a Ming Dynasty cicada. The peanut shell size, the sheep fat white jade, the carved is delicate and vivid, and it is not the best. But under the fluorescent lamp, carefully observed with a magnifying glass, the "defect" was eventually caught, and the back of the cicada was close to the roots of the wing, and there were traces of filling.
The filling of jade carving generally uses synthetic resin to mix sliding stone powder and apply it to the missing part to shape it. In order to make the color of the repair site consistent with the colors of the surrounding jade, the same species of repairing jade articles must be grinded into powder, such as peacock stone, lapigraphy stone, etc.; Fill.
The filling of the above cicada decoration does not use synthetic resin. It is filled with waxing color tone, and then flattened the wax surface with a hot knife. Because the lack is small, it is difficult to detect.
In addition to filling, you can also make up for it. Some jade wares are placed for many years, and when they are not minded, they are lost or dropped one of them, but they are the key "parts", so they cause the sense of incompleteness. The method of making up is to re -create the same "parts" on the jade, use synthetic resin talc powder or today's scientific alternative, to push or use high temperature blowing oxygen connection to the missing parts. Because the "part" is fine, it can be "charged" by putting it up.
The travel shopping mall in Shanghai, which shows a chain or crystal hexagonal lotus lamp in its window cabinet, which is delicately carved, and the shape is very generous. The size is uniform, and it is naturally hanging from the top cover to the shoulder of the hexagonal lotus. One day, the old gentleman with the jade carving factory accompanied the foreign guests to visit, and was amazed by the work. When the salesperson asked the old gentleman to reward it carefully, he found that the root chain was re -modified with the "missing place" under the magnifying glass, not "raw juice soup".
In this case, this work loses its original value. Generally speaking, although this approach is lost a lot in terms of economic value, most of the original appearance can still be retained in art appreciation, and it can also be called a method that cannot be adopted when it cannot be applied.

best wholesale fashion jewelry online Pay content for time limit to check for freenAnswer the jade bracelet that can be repaired 1. Drawing gold, pressing the golden thread into the crack to block the cracks, and increase the firmness of the jade bracelet; Chain combat; 3. Reform, if the jade bracelet is no longer repaired, it is recommended to re -transform the broken jade bracelet into other accessories.

wholesale wedding ring jewelry quotes If the fracture is in line with the original mouth, try universal glue ~
The quality of good quality ~